Pre-Insulated pipelines are used to transport both high and low temperature mediums where maintaining pipeline temperature
is important. Applications range from low temperature LNG pipelines to high temperature bitumen pipelines. The pipelines
consist of an inner carrier pipe covered in an insulating material and jacketed externally for protection and integrity.
Canusa-CPS provides a range of products for these often complex joint systems.
Sealing Protection
Canusa SuperCase™
Tubular or wraparound cross-linked, heat-shrinkable casing products for high performance sealing protection.
Superseal™
Heat-shrinkable collar sleeves for the end sealing protection of non-cross-linked casings.
Sealing Sleeves
Heat-shrinkable sleeves for direct-to-foam or over metal casings to seal the insulation material against moisture ingress.
Accessories
Various accessories products for sealing pre-insulated pipelines and pre-insulated pipelines products.
Heat-Shrinkable Sleeves
Heat-Shrinkable Sleeves
A series of heat-shrinkable sleeve systems that provide superior corrosion protection (2-layer or 3-layer) of exposed steel of
pre-insulated pipe on field applied girth-weld joints of buried, exposed and offshore pipelines operating up to 130ºC (266ºF).
Liquid Coatings
HBE Liquid Epoxy
Two-component, 100% solids epoxy coatings for direct-to-steel application providing superior corrosion protection on field
applied girth-weld joints of FBE coated pipelines or as a pipeline rehabilitation coating. Suitable for use on pipelines operating
up to 150ºC (302ºF).
|
