Shrink sleeve for girth-weld protection of high operating temperature 3LPE coated pipelines The GTS-65 system provides superior corrosion protection and excellent bonding on 3LPE coated pipelines operating at temperatures up to 65°C (149°F) (actual rating may vary depending on local requirements). • Unique adhesive technology allows for lower installation temp pre-heats with/out epoxy • Products are available in various configurations to meet project installation requirements • Superior corrosion protection when epoxy primer (E Primer) is "force-cured" and pre-inspected on steel only • High stress strength adhesives pass Aleyska Shear Test at maximum operating temperature • The same pre-heat temperature with or without epoxy minimizes installation procedure issues • Epoxy is applied to steel only, which results in lower material and labour costs • “Force-cured” epoxies enable the joints to be pre-inspected prior to sleeve application and will not be displaced during sleeve alignment and recovery Oil and Gas Offshore Polypropylene Water Wrapid Sleeve™ CanusaWrap™ 2-Layer 3-Layer 55-1520 (2"-60") up to 65°C (149°F) SNAM, Gaz de France, TransCanada, Gazprom These documents are in PDF format. To download other languages or the Adobe Acrobat reader, please visit the All Literature section. Product Data Sheets GTS-65 PDS (8.5" x 11") GTS-65 PDS (A4) Installation Guides GTS-65 2L Wrapid Sleeve™ (8.5" x 11") GTS-65 2L Wrapid Sleeve™ (A4) GTS-65 3L Wrapid Sleeve™ (8.5" x 11") GTS-65 3L Wrapid Sleeve™ (A4)