Shrink sleeve for girth-weld protection of high operating temperature 3LPE coated pipelines The GTS-80 system provides superior corrosion protection and excellent bonding on 3LPE coated pipelines operating at temperatures up to 80°C (176°F) (actual rating may vary depending on local requirements). • Unique adhesive technology allows for lower installation temp pre-heats with/out epoxy • Products are available in various configurations to meet project installation requirements • Superior corrosion protection when epoxy primer (E Primer) is "force-cured" and pre-inspected on steel only • High stress strength adhesives pass Aleyska Shear Test at maximum operating temperature • The same pre-heat temperature with or without epoxy minimizes installation procedure issues • Epoxy is applied to steel only, which results in lower material and labour costs • “Force-cured” epoxies enable the joints to be pre-inspected prior to sleeve application and will not be displaced during sleeve alignment and recovery Oil and Gas Offshore Polypropylene   Wrapid Sleeve™ CanusaWrap™ 2-Layer 3-Layer 55-1520 (2"-60") up to 80°C (176°F) SNAM, Gaz de France, TransCanada, Gazprom These documents are in PDF format. To download other languages or the Adobe Acrobat reader, please visit the All Literature section. Product Data Sheets GTS-80 PDS (8.5" x 11") GTS-80 PDS (A4) Installation Guides GTS-80 IG (8.5" x 11") GTS-80 IG (A4) GTS-80T IG (8.5" x 11") GTS-80T IG (A4) Material Safety Data Sheets GTS-80 MSDS (8.5" x 11")