The GTS-PE system provides superior corrosion protection and excellent bonding on FBE and 3LPE coated pipelines operating at temperatures up
to 100°C (212°F) (actual rating may vary depending on local requirements).
| • |
Unique adhesive technology allows for lower installation temp pre-heats with/out epoxy |
| • |
Products are available in various configurations to meet project installation requirements |
| • |
Superior corrosion protection
when epoxy primer (E Primer) is "force-cured"
and pre-inspected on steel only |
| • |
The same pre-heat temperature with or without epoxy minimizes installation procedure issues |
| • |
Epoxy is applied to steel only, which results in lower material and labour costs |
| • |
“Force-cured” epoxies enable the joints to be pre-inspected prior to sleeve application and will not be displaced during sleeve alignment and recovery |
 |
 |
Oil and Gas |
|
 |
Offshore |
|
 |
Girth-Weld Joints |
|
 |
Reel, J & S Lay |
|
 |
High Temp |
|
|
|
|
 |
 |
Wrapid Sleeve™ |
|
 |
CanusaWrap™ |
|
 |
3-Layer |
|
|
 |
 |
55-1220 (2"-48") |
|
 |
 |
up to 100°C (212°F)* |
|
| * For Project Specific Applications,
consult your Canusa Representative |
| |
