For High Temperature Polypropylene Pipelines The GTS-PP system provides excellent adhesion and superior corrosion protection to polypropylene coated pipelines operating up to 140°C (284°F). GTS-PP has been designed with a unique cross-linked polypropylene backing and modified polypropylene adhesive. The combination allows sleeve recovery and bonding to polypropylene mainline coatings. Lower preheats are required versus other systems and superior bonding is achieved without damaging the coating during installation. • Unique adhesive technology allows for lower installation temperature pre-heats • Products are available in various configurations to meet project installation requirements • High stress strength adhesives pass Aleyska Shear Test at maximum operating temperature • Epoxy is applied to steel only, which results in lower material and labour costs • “Force-cured” epoxies enable the joints to be pre-inspected prior to sleeve application and will not be displaced during sleeve alignment and recovery Oil and Gas High Temperature Girth-Weld Joints Polypropylene Offshore       Wrapid Sleeve™ CanusaTube™ 3-Layer   115-1220 (4"-48")     up to 130°C (266°F) up to 140°C (284°F) These documents are in PDF format. To download other languages or the Adobe Acrobat reader, please visit the All Literature section. Product Data Sheets GTS-PP PDS (8.5" x 11") GTS-PP PDS (A4) GTS-PP-65 PDS (8.5" x 11") GTS-PP-65 PDS (A4) GTS-PP-65 PDS (3L) (8.5" x 11") GTS-PP-65 PDS (3L) (A4) GTS-PP-100 PDS (8.5" x 11") GTS-PP-100 PDS (A4) Installation Guides GTS-PP CanusaTube™ IG (8.5" x 11") GTS-PP CanusaTube™ IG (A4) GTS-PP Wrapid Sleeve™ IG (8.5" x 11") GTS-PP Wrapid Sleeve™ IG (A4) GTS-PP-65 (8.5" x 11") GTS-PP-65 (A4) GTS-PP-65 (3L) (8.5" x 11") GTS-PP-65 (3L) (A4) GTS-PP-100 (8.5" x 11") GTS-PP-100 (A4)